Sale 9%
MR 70 Developer white (Box of 12 cans)

MR 70 Developer white (Box of 12 cans)

€ 94 € 104

(excl. VAT)

Model/Product no.: #70D
pcs.
12 cans of 500ml. MR® 70 Developer white
For penetrant testing according to EN ISO 3452-1:2013

General appearance and composition:
  • Solvent removable developer for red and fluorescent penetrant testing, form d and e according to EN ISO 3452-1:2013
  • Dries quickly
  • Testing security is guaranteed at work piece temperatures between -10 °C and +50 °C
  • Aerosol overhead sprayable

Relevant approvals and specifications
  • Sample testing acc. to EN ISO 3452-2:2006
  • Low content of halogens and sulphur according to EN ISO 3452-2:2006 and ASME Code V, Section V, Article 6, T-641
  • In correspondence with Lloyd's Reg., Bureau Veritas, Det Norske Veritas, admitted by Framatome ANP
  • Produits et Matériaux Utilisables en Centrales (PMUC)
  • TLV 9017 01:2011-01

Application:
  • Remove tinder, rust and other contaminations from surface in a suitable manner. A possible precleaner for removal of oils or fats is e.g. our remover MR® 79.
  • Apply MR® Penetrant to the part to be tested either by spraying, brushing, flooding or dipping. Allow to penetrate for at least 5 minutes.
  • Remove excess MR® Penetrant from surface either using water or a clean lint-free cloth lightly moistened with an MR® Remover.
  • Spray MR® 70 Developer from a distance of approx. 20 cm on the dry surface, achieving a thin, uniform layer. Depending on the used penetrant, surface defects will appear as red or fluorescent indications. 
Please note: If the developer layer is too thick tiny discontinuities will not appear through the developer. When using a spray gun connected to compressed air it must be ensured that the supplied air is free of water and fat.

Minimum shelf life:
  • Will keep for a minimum of 4 years, stored at room temperature

Pack sizes:
  • Aerosols, 500 ml (1 box contains 12 aerosols)
  • 5 L, 30 L

Related products

Customers who bought this product also bought