12 cans of 500ml. MR® 76 S Magnetic powder suspension
Version A, S and D, black, ready for use, for magnetic particle inspection according to DIN EN ISO 9934 part 1
General appearance and composition:
· Mixture of isoparaffinic carbonhydroxides, additives and pigments
· MR® 76 S Magnetic powder suspension black serves to indicate cracks when performing non fluorescent magnetic particle inspection
· Medium particle size da = 2,5 – 5 µm
· Sediment:
Please mention the required version on your orders!
· Low odour
· MR® 76 S Magnetic powder suspension black meets the requirements of DIN EN ISO 9934 part 2 and may be identified as „free of corrosive ingredients according to DIN EN ISO 9934 part 2“.
· Regarding the contents of corrosive ingredients MR® 76 S Magnetic powder suspension black meets the requirements of ASME Code V, Section V, Article 6, T-641.
Relevant approvals and specifications
· Type testing in accordance to DIN EN ISO 9934 part 2
· Examination of corrosive ingredients according ASME Code V, Section V, Article 6, T-641
· In correspondence with Lloyd's Reg., Bureau Veritas, Det Norske Veritas, admitted by Framatome ANP
· Produits et Matériaux Utilisables en Centrales (PMUC)
Application:
· Remove fat and oil (e.g. with MR® 71 Paint Remover) as well as tinder, rust and other contaminations from surface in a suitable manner
· Spray a thin film MR 72® White contrast paint (layer thickness max. 40 µm) on the surface and allow to dry for a few seconds
· Apply MR® 76 S Magnetic powder suspension black on the surface during magnetization (e.g. with a MR® Hand yoke)
· Discontinuities will appear as black magnetic particle indications on the white surface
· After documentation the surface can be cleaned with MR® 71 Paint Remover
· Processing temperature max. 100 °C
Minimum durability:
· Will keep for a minimum of 4 years, stored at room temperature
Pack sizes:
· Aerosols, 500 ml (1 box contains 12 aerosols)
· 5 L
Version A, S and D, black, ready for use, for magnetic particle inspection according to DIN EN ISO 9934 part 1
General appearance and composition:
· Mixture of isoparaffinic carbonhydroxides, additives and pigments
· MR® 76 S Magnetic powder suspension black serves to indicate cracks when performing non fluorescent magnetic particle inspection
· Medium particle size da = 2,5 – 5 µm
· Sediment:
MR® 76 S, Standard: 0,4 – 0,8 ml/100 ml (1 h)
MR® 76 S, Version A:1,2 – 2,4 ml/100 ml (1 h) (corresp. ASME-specifications)
MR® 76 S, Version D: 0,07 – 0,1 ml/100 ml (1 h)
MR® 76 S, Version A:1,2 – 2,4 ml/100 ml (1 h) (corresp. ASME-specifications)
MR® 76 S, Version D: 0,07 – 0,1 ml/100 ml (1 h)
Please mention the required version on your orders!
· Low odour
· MR® 76 S Magnetic powder suspension black meets the requirements of DIN EN ISO 9934 part 2 and may be identified as „free of corrosive ingredients according to DIN EN ISO 9934 part 2“.
· Regarding the contents of corrosive ingredients MR® 76 S Magnetic powder suspension black meets the requirements of ASME Code V, Section V, Article 6, T-641.
Relevant approvals and specifications
· Type testing in accordance to DIN EN ISO 9934 part 2
· Examination of corrosive ingredients according ASME Code V, Section V, Article 6, T-641
· In correspondence with Lloyd's Reg., Bureau Veritas, Det Norske Veritas, admitted by Framatome ANP
· Produits et Matériaux Utilisables en Centrales (PMUC)
Application:
· Remove fat and oil (e.g. with MR® 71 Paint Remover) as well as tinder, rust and other contaminations from surface in a suitable manner
· Spray a thin film MR 72® White contrast paint (layer thickness max. 40 µm) on the surface and allow to dry for a few seconds
· Apply MR® 76 S Magnetic powder suspension black on the surface during magnetization (e.g. with a MR® Hand yoke)
· Discontinuities will appear as black magnetic particle indications on the white surface
· After documentation the surface can be cleaned with MR® 71 Paint Remover
· Processing temperature max. 100 °C
Minimum durability:
· Will keep for a minimum of 4 years, stored at room temperature
Pack sizes:
· Aerosols, 500 ml (1 box contains 12 aerosols)
· 5 L
Customers who bought this product also bought