The technical precision of T-UD3 is top notch, with greater functionality than the most expensive appliances, but at a significantly lower price.
The Rebound (Leeb) probe is used for measuring the hardness of non-ferrous metals, cast iron, coarse-grained materials, massive products etc.
The ultrasonic (UCI) probe is used for measuring the hardness of small items, objects with a thin wall, complex form, and to measure the hardness of surface hardened layers.
|50N (11.2lbf)||Considered to be the Universal type for most general applications.
50N of downward hand pressure is required to activate the probe.
Surface finish equivalent to 80 grind or better.
|Induction or carburized machined parts, e.g.. camshafts, turbines, weld inspection, HAZ.
Measurement in grooves, gear tooth flanks and roots
Turbine blades, inside tubes with∅> 90mm.
|10N (2.2lbf)||Load is easy to apply; provides control to test on a sharp radius.
Only 10N of downward hand pressure is required to activate the probe.
Surface finish equivalent to 150 grind or better.
|Ion-nitrided stamping dies and molds, forms, presses, thin-walled parts
Bearings, tooth flanks
Turbine blades, inside tubes with∅> 90 mm.
|Loading Force of UCI||1kgf (10N) 2.2 lbf og/eller 5kgf (50N) 11lbf|
|Measuring Range||HV:230~940; HRC:20~70; HB:90~650. Tensile strength, MPa 370~1740|
|Measuring Accuracy||HV:±3%HV; HRC:±1.5%HRC; HB:±3%HB|
|Indenter||136° Vickers Diamond Indenter (UCI), Rebound (Leeb)|
|Measuring Direction||AAny direction 360°|
|Data Storage||SD Memory card|
|Communication||Upload data to PC and export as a spreadsheet (USB cable and software included)|
|Hardness Scale||HRC, HB, HV, HRB, HL, MPa|
|Materials||- Ultrasonic (UCI) probe - pre-calibrated for steel
- Rebound (Leeb) pre-calibrated for steel, cast iron, stainless steel, aluminum, bronze
- Additional custom materials for calibration
|Data display||Load applied/contact, Single test result, Max, Min, Average of tests, Number of tests, Deviation, Var. coeff, Histogram, Signal and SMART MODE (Filter of incorrect measurements).|
|Hardness indication||Backlit Color LCD display.|
|Operating Environment||Temperature:-20°C~40°C; Humidity: 30%~80%R.H|
|Power Supply||DC 6V (3 pc batteries AA)|
|Net Weight||Approx. 0.3kg (Without probe)|
|Battery||Approx. 10 hours.|
High-precision, multi-functional, convenient, reliable and at affordable price!
The device works with both ultrasonic (UCI) and rebound (Leeb) probes. You get the benefits of two methods of measurement - it is the maximum that can be obtained from a portable hardness tester.
Display of soft keyboard to name and store test results
Intuitive and userfriendly PC software is included.