MR 311-R Penetrant red (Box of 12 cans)

12 cans of 500ml. MR® 311-R Penetrant red
for penetrant testing according to EN ISO 3452-1:2013

General appearance and composition:

• Water and solvent removable penetrant red, type II acc. to EN ISO 3452-1:2013
• Dark red colour
• Free of AZO
• Very goof biodegradability acc. to EN ISO 9888
• Suitable for all metals (suitability for plastics and ceramics needs testing prior to use)
• Testing security is guaranteed at work piece temperatures between +10 °C and +50 °C
• Good removing from skin
• Very good washability
• Aerosol overhead sprayable

Relevant approvals and specifications

• Sample testing acc. to EN ISO 3452-2:2006
• Sensitivity class 2 acc. to EN ISO 3452-2:2006 system IICe
  • Remover: MR® 79, MR® 85, MR® 88
  • Developer: MR® 70
• Sensitivity class 2 acc. to EN ISO 3452-2:2006 system IIAc
  • Remover: Water
  • Developer: MR® 703 W
• Sensitivity class 2 acc. to EN ISO 3452-2:2006 system IIAe
  • Remover: Water
  • Developer: MR® 70
• Low content of halogens and sulphur according to EN ISO 3452-2:2006 and ASME Code V, Section V, Article 6, T-641

Application:

• Remove tinder, rust and other contaminations from surface in a suitable manner. A possible precleaner for removal of oils or fats is e.g. our remover MR® 79.
• Apply MR® 311-R Penetrant red to the part to be tested either by spraying, brushing, flooding or dipping. Allow to penetrate for at least 5 minutes.
• Remove excess penetrant from surface either using water or a clean lint-free cloth lightly moistened with an MR® Remover.
• Spray MR® 70 Developer or MR® 703 W Developer from a distance of approx. 20 cm on the dry surface, achieving a thin, uniform layer. Surface defects will appear as red indications.

Please note: If the developer layer is too thick tiny discontinuities will not appear through the developer.

Minimum shelf life:

• Will keep for a minimum of 4 years, stored at room temperature

Pack sizes:

• Aerosols, 500 ml (1 box contains 12 aerosols)
• 5 L, 30 L, 200 L