MR® 158 Magnetic powder concentrate fluorescent, 1:50, water suspendable for magnetic particle inspection according to EN ISO 9934-1
General appearance and composition:
Application:
Minimum shelf life:
Pack sizes:
Datasheet:
mr_158_gb_pi_magnetic-powder-consentrate-fluorescent-1-50-water-suspendable.pdf
General appearance and composition:
- Water suspendable concentrate with fluorescent ferromagnetic particles
- Includes corrosion inhibitor, bactericide and other additives
- Free of nitrite, halogen, sulphur and silicone
- Medium particle size da = 1-3 µm
- Yellow-green fluorescent under UV-radiation
- Sediment 1:50 with water 0,20 ml – 0,30 ml / 100 ml (0,5 h)
- Processing temperature +10 to +50 °C
- No declaration of hazardous ingredients – ECO-LINE Relevant Specifications
- The corrosive comonentes are in accordance with EN ISO 9934-2
- In correspondence with Lloyd's Reg., Bureau Veritas, Det Norske Veritas, admitted by Framatome ANP
- Produits et Matériaux Utilisables en Centrales (PMUC)
Application:
- Remove tinder, rust and other contaminations from surface in a suitable manner
- Shake concentrate well
- Dilute 1:50 in water; depending on the intended use dilute in water up to 1:100
- During magnetization (e.g. with a MR® Hand yoke) spray the preparation on the surface
- If using a test bench, fill the preparation into the container with the pump
- Under UV-radiation discontinuities will appear as yellow-green fluorescent magnetic particle indications
Minimum shelf life:
- Will keep for a minimum of 1 year, stored at room temperature
Pack sizes:
- 1 kg, 5 kg
Datasheet:
mr_158_gb_pi_magnetic-powder-consentrate-fluorescent-1-50-water-suspendable.pdf
Customers who bought this product also bought