12 cans of 500ml. MR® 76 F Magnetic powder suspension
fluorescent, ready for use, for magnetic particle inspection according to DIN EN ISO 9934 part 1
General appearance and composition:
• Mixture of isoparaffinic carbonhydroxides, additives and pigments
• MR® 76 F Magnetic powder suspension fluorescent serves to indicate cracks when performing magnetic particle inspection under UV-light
• Medium particle size: da = 3-4 µm
• Low odour, oil based
• Sediment: 0,2-0,3 ml / 100 ml (1 h)
Relevant approvals and specifications
• Type testing in accordance to DIN EN ISO 9934 part 2
• Examination of corrosive ingredients according ASME Code V, Section V, Article 6, T-641
• In correspondence with Lloyd's Reg., Bureau Veritas, Det Norske Veritas, admitted by Framatome ANP
• Produits et Matériaux Utilisables en Centrales (PMUC)
• Aerosol overhead sprayable
Application:
• Remove fat and oil (e.g. with MR® 71 Paint Remover) as well as tinder, rust and other contaminations from surface in a suitable manner
• Apply MR® 76 F Magnetic powder suspension fluorescent on the surface during magnetization (e.g. with a MR® Hand yoke)
• Under UV-light discontinuities will appear as yellow-green fluorescent magnetic particle indications on surface
• After documentation the surface can be cleaned with MR® 71 Paint Remover
• Processing temperature max. 100 °C
Minimum shelf life:
• Will keep for a minimum of 4 years, stored at room temperature
Pack sizes:
• Aerosols, 500 ml (1 box contains 12 aerosols)
• 5 L, 10 L
fluorescent, ready for use, for magnetic particle inspection according to DIN EN ISO 9934 part 1
General appearance and composition:
• Mixture of isoparaffinic carbonhydroxides, additives and pigments
• MR® 76 F Magnetic powder suspension fluorescent serves to indicate cracks when performing magnetic particle inspection under UV-light
• Medium particle size: da = 3-4 µm
• Low odour, oil based
• Sediment: 0,2-0,3 ml / 100 ml (1 h)
Relevant approvals and specifications
• Type testing in accordance to DIN EN ISO 9934 part 2
• Examination of corrosive ingredients according ASME Code V, Section V, Article 6, T-641
• In correspondence with Lloyd's Reg., Bureau Veritas, Det Norske Veritas, admitted by Framatome ANP
• Produits et Matériaux Utilisables en Centrales (PMUC)
• Aerosol overhead sprayable
Application:
• Remove fat and oil (e.g. with MR® 71 Paint Remover) as well as tinder, rust and other contaminations from surface in a suitable manner
• Apply MR® 76 F Magnetic powder suspension fluorescent on the surface during magnetization (e.g. with a MR® Hand yoke)
• Under UV-light discontinuities will appear as yellow-green fluorescent magnetic particle indications on surface
• After documentation the surface can be cleaned with MR® 71 Paint Remover
• Processing temperature max. 100 °C
Minimum shelf life:
• Will keep for a minimum of 4 years, stored at room temperature
Pack sizes:
• Aerosols, 500 ml (1 box contains 12 aerosols)
• 5 L, 10 L
Customers who bought this product also bought
![preload spinner](https://shop17823.sfstatic.io/_design/common/img/preloader/preloader-black.gif)
![preload spinner](https://shop17823.sfstatic.io/_design/common/img/preloader/preloader-black.gif)